Marwood Group - Speed Reduction Ramp.jpg
Speed Reduction Ramp-Marwood Group1.jpg
Marwood Group - Speed Reduction Ramp.jpg
Speed Reduction Ramp-Marwood Group1.jpg

Speed Reduction Ramp (Cable)

Available for Hire

Manufactured from heavy-duty P.V.C. An ideal method of protecting a temporary cable or hose or reducing traffic speed. Should be laid as alternate black and yellow sections and bolted down.

Marwood Tip: Connectors for all ramps are recommended to stop separation and road creep and approach with minimum speed.

SR500/SR-500

  • Supplied as 500mm x 500mm x 70/75mm high sections ( Black yellow)
  • 48mm x 33mm aperture suitable for temporary cable protection
  • End caps available for permanent installation if required
  • 1mtr of ramp weights 30kg
  • Material composition: The ramp is composed of synthetic rubber (underlayer) and natural rubber (upper layer, yellow part)
  • Allowable axial weight is 12.5 T or less

Additional product available upon request

  • Speed ramp end part 210mm x 500mm x 70/75mm ( Black)
  • Dog bone – connector
  • Cats eyes- supplied in sets 8 pcs
  • Bolts – supplied in sets 4 pcs/set

Item added to Enquiries List

View

REQUEST A BROCHURE

At Marwood Group Ltd, we offer a range of non-mechanical plant available to hire or purchase. To view the full range of products available, request a brochure today.

Request A Brochure

FIND A DEPOT

FIND A DEPOT

Click on the accreditations below to see our certificates