Plastic MarroBar Road Barrier

Other images (click to enlarge)

click to enlarge click to enlarge click to enlarge

Designed to offer maximum safety, MarroBar is one of the quickest deployable systems on the market and with up to 200 metres per load (depending on vehicle being used) it offers savings on labour and transport. On impact, MarroBar will bring an errant vehicle to a controlled stop. Manufactured from prime UV stabilised polyethylene this provides a versatile yet strong, flexible one piece system for easy handling and instalment. There is no need for crane lifting machinery for any given emergency set-up.

Deployed with ease, the MarroBar barrier system is locked together in the centre with a steel pin formation and for added strength two flat steel plates are easily screw fitted making MarroBar a strong and versatile barrier to withstand impacts from errant vehicles. MarroBar barriers are stacked safely and securely with stacking locator points on the top and bottom of each barrier. This allows the barrier to be stacked vertically reducing the cost of transport per metre and reducing storage space.

  • Quick secure pin hinge and support plates
  • Can be filled with water during assembly
  • Totally free-standing-no permanent fixings
  • One piece moulding, no added sections
  • Easy to handle and store
  • Wide fork lift slots at base
  • Up to 200 metres per load
  • Anti climb mesh and hoarding panels available
  • Tested and approved by TRL to BS EN1317-N1 50 mph test
  • Marrobar fully filled to top: approximately weight 535kg
  • Now available with Pedestrian & Vehicle Gates

Top sections an gates can be added if required which are charged as extra items, please ask for details.

Optional Extras.

Marrobar Pedestrian Gate: The standard fence panel post is used to stand the pedestrian gate. The posts consist of anti-luce fittings which will hold the gate and fence panels can be place on the Marrobar on both sides.

Marrobar Vehicle Gate: The vehicle gate post as shown in photo is fitted into joining holes of the MarroBar. The vehicle gate is bolted to one side making it a hinge section. Standard fence panels can be placed on the Marrobar and tightened by the anti-luce fittings on the post. Use standard fence panel post if more fences are required on the MarroBar.

Overall height:2122mm

Overall width: (inc lugs):1435mm

Internal width of gate:1200mm


Length 2000mm
Height 800mm
Width 500mm
Weight empty 60kg
Weight filled with water 600kg