Arrestor Bed Fall Protection

Find your nearest
Marwood depot

Click Here

Products

Safety Equipment

Arrestor Bed Fall Protection

Arrestor Bed is a Fall Arrest System which can be self installed in most floor plans. This system will provide a practical adaptable solution particularly where the demands for fall protection are constantly changing. Arrestor Bed is constructed from tough, fire retardant material and meets the statutory requirement to provide a safe working environment on building sites. Fully Health and safety approved, the system gives the workforce the necessary yielding surface. The inner bag will deflate slowly on impact but the outer bag will stay inflated, reducing the risk of injuries sustained by rebound. Thanks to the inflated height of 750mm, a fall from first floor joist level would be no more than the maximum two metres. Arrestor Beds are inflated using air supplied by either an 110v high volume low pressure fan or cordless battery operated inflator.

Once inflated, the Arrestor Beds can be fastened together with clips ensuring there are no gaps. They can be positioned in various combinations to ensure the whole area is filled. When not in use, the arrestor Beds can be deflated, folded neatly and stowed away

Each quickly inflated - 30 seconds - by electric or petrol blower

Easily installed, by your own site staff - training & induction provided

Economically Transported & Stored

Modules are independent of each other

One size Air Filled module 2150mm x 750mm x 750mm

Secured by simple push fit plastic clips

Suitable for falls up to 2mtr above bed surface

Low cost transportation

Quick and easy to install

Shape allows flexibility for providing fall protection in every corner

Unlimited configurations are possible

Ideal for use inside buildings as well as outside

Pack flat for easy storage and transportation