Rubbish Chute Section
Rubbish Chute Section
Sale Only
Standard Rubbish Chute is an ideal way of transferring debris and rubble from the various levels of any building or structure to a builders skip. Installed onto a scaffold or if no scaffold available, a simple 'H' frame should be used at a window opening or roof parapet. Standard Rubbish Chute consists of the following five basic components:

Standard plastic module: This item is the main component of all assemblies. Each unit is 1m effective working length and comes complete with two fixing / support chains.

Steel liner: Designed to fit inside the standard plastic modules and act as a wear sleeve. Steel liners are recommended as additional protection on any installation where the materials being disposed of are particularly abrasive or sharp or at any point where the chute bends or kicks out and may create an impact point, for example where a chute comes away from the building to meet a skip.

Steel top hopper: Only one top hopper is required for each installation and the purpose of this unit is to provide an improved aperture at the point where debris is being placed into the chute to avoid any unnecessary spillage. Once the top section of chute is positioned and secured in place, the top hopper is added.

Plastic side entry hopper: This unit enables the user to construct a multi-entry chute in order that debris can be placed in the chute at various floor levels.

Plastic side entry hopper liner: The item fits inside the hopper and a flap controls the flow of debris from the level above while allowing further debris to be safely added at the lower level.
Raise an enquiry
Print this page
Optional Extras: Skip Cover & Heavy duty fixing chains
Specifications                                                                                                             
Chute Hopper Weight 20"Chute Module Weight 20"
20kg6.5kg
Related Products
Untitled Page